Our CNC Machining Capability
5-Axis CNC Milling
Highly complex parts are produced using 5-axis CNC milling, which enables multi-angle machining in a single setup. This enhances precision and dimensional accuracy, improves surface finish and supports the creation of intricate geometries
3 and 4-Axis CNC Milling
With advanced 3-axis and 4-axis CNC milling technology, we efficiently produce complex, high-precision parts across various materials. Our streamlined processes ensure tight tolerances, consistent quality, and fast turnaround times
CNC Turning
CNC turning specializes in the high-precision machining of round or cylindrical shapes across a wide range of materials—including metals and plastics, while ensuring excellent consistency in maintaining tight tolerances
EDM and Wire Cutting
EDM uses electrical sparks to shape hard metals and complex parts with high precision, especially where traditional cutting tools can't reach. Wire EDM uses a thin wire and electrical discharge to cut intricate shapes.
CNC Machining Parts Gallery
The Available Material For Our CNC Machining Service
ABS (Acrylonitrile Butadiene Styrene)
Impact-Resistant
Easy to Machine and Glue
Opaque and Lightweight
📌 Good for: Prototypes, housings, enclosures, consumer products.
Nylon (Polyamide, PA6 / PA66)
Impact-Resistant
Moderately Easy to Machine and Bond
Opaque and Lightweight
📌 Good for: Gears, bushings, bearings, structural components.
Polycarbonate (PC)
High Impact Resistance
Easy to Machine and Thermoform
Opaque or Transparent, Lightweight
📌 Good for: Prototypes, housings, safety covers, impact-resistant enclosures.
POM (Polyoxymethylene / Delrin)
Impact-Resistant and Wear-Resistant
Excellent Machinability, Difficult to Glue
Opaque and Lightweight
📌 Good for: Gears, bushings, precision mechanical parts.
PP (Polypropylene)
Impact-Resistant and Flexible
Moderate Machinability, Difficult to Glue
Opaque and Lightweight
📌 Good for: Chemical containers, hinges, lightweight housings.
HDPE (High-Density Polyethylene)
Impact-Resistant and Chemical-Resistant
Easy to Machine, Difficult to Glue
Opaque and Lightweight
📌 Good for: Prototypes, chemical tanks, housings, cutting boards.
PTFE (Polytetrafluoroethylene / Teflon)
Excellent Impact and Chemical Resistance
Moderately Easy to Machine, Very Difficult to Glue
Opaque and Lightweight
📌 Good for: Seals, insulators, chemical-resistant enclosures, low-friction parts.
PEEK (Polyetheretherketone)
High Impact and Heat Resistance
Easy to Machine, Difficult to Glue
Opaque and Lightweight
📌 Good for: High-performance prototypes, aerospace housings, medical enclosures.
PMMA (Polymethyl Methacrylate / Acrylic)
Moderate Impact Resistance, Very Easy to Machine and Glue
Opaque or Transparent, Lightweight
📌 Good for: Prototypes, display housings, light diffusers, enclosures.
PEI (Polyetherimide / Ultem)
- High Strength and Heat Resistance
- Excellent Dimensional Stability
- Naturally Flame Retardant and Chemically Resistant
📌 Good for: Aerospace parts, medical components, high-heat electrical housings, structural applications
Brass (CZ121, H52, H69, C63000)
Excellent Machinability
Corrosion-Resistant
Good for Electrical Conductivity
📌 Good for: Fittings, connectors, valves, and electrical components.
Copper (C101, T2, C1100)
Excellent Electrical Conductivity
Thermal Conductivity
Corrosion-Resistant
📌 Good for: Electrical components, heat exchangers, bus bars.
Bronze (660)
High Impact and Wear Resistance
Easy to Machine, Difficult to Glue
Opaque and Dense
📌 Good for: Bushings, bearings, gears, marine components.
Aluminum 6061&6082
Excellent Strength-to-Weight Ratio
Good Corrosion Resistance
Highly Machinable and Weldable
📌 Good for: General-purpose parts, enclosures, brackets, automotive components.
Aluminum 7075
High Strength and Hardness
Less Corrosion Resistance than 6061
Very Good Machinability
📌 Good for: Aerospace parts, structural components, performance applications.
Aluminum 5083
Exceptional Corrosion Resistance
High Strength in Marine Environments
Difficult to Machine
📌 Good for: Marine parts, tanks, structural components in harsh environments.
Stainless Steel (Typically 304 or 316)
High Impact, Heat, and Corrosion Resistance
Easy to Machine with Proper Tools, Difficult to Glue
Opaque and Dense
📌 Good for: Medical devices, structural components, aerospace and marine parts.
Carbon Steel (Typically 1018 or 1045)
High Impact Strength and Good Heat Resistance
Easy to Machine and Weld, Difficult to Glue
Opaque and Dense
📌 Good for: Structural parts, shafts, tools, mechanical components.
Tool Steel (Typically D2)
Very High Impact, Wear, and Heat Resistance
Easy to Machine When Annealed, Difficult to Glue
Opaque and Dense
📌 Good for: Dies, molds, cutting tools, high-wear mechanical parts.
Titanium (Grade 5 – Ti-6Al-4V)
High Strength-to-Weight Ratio
Excellent Corrosion Resistance
Biocompatible and Lightweight
📌 Good for: Aerospace parts, medical implants, high-performance automotive components.
Why To Choose Us
High Quality Standard
* Tight tolerance: ±0.005 mm or better depending on the part;
* Surface finish : Ra ≤ 0.8-1.6 µm for machined surfaces;
* Inspection & QA: FAI, CMM reports, and surface inspections ;
* Certifications: ISO9001, ISO13485, IAFT16949;
Fast Service
* Fast Quotation; 2-6 hours based on 3D drawing ;
* Fast Lead Time : 24-hour/7 operation of in-house workshop;
* Fast communication: 1 hours feedback for problem solving ;
* Shipping time: 3-5 days by DHL to your door.
Rich Experience
* Over 20 years' deep technical experience of CNC machining;
* All workers in the workshop are highly skilled ;
* Proficient in 3-4-5 axis CNC milling and turning;
* Deep understanding of machining various metals;
Special Ability
* Strong problem-solving about production under pressure;
* Urgent order are managed in 1-2 days;
* Able to analyze customer's part designs and recommend changes that reduce cost or improve manufacturability.
Our Other Manufacturing Capabilities
- laser cutting, bending, assembly, welding & fabrication
- Material: aluminum, steel, stainless steel, brass, copper
- sheet thickness: 1-6mm
- produced by CNC milling, CNC turning, sheet metal, vacuum casting, 3D printing, extrusion eta
- fast lead time, high precision, superior surface finish
- painting, black oxide, electroplating
- bead blasting, powder coating
- clear/black/colorful anodizing
- passivation, plating, knurling
- polishing, sanding, brushing